Aerway

Advanced Aeration Systems offer five tine options on three-point hitch-mounted or pull-type frames with widths from 45 to 90 inches.


AgriMetal

The Core Breaker separates grass roots from soil and deposits soil back on the turf. Available in 69 and 93-inch working widths.


Bannerman

Offers four aerators with widths from 18 inches to 15 feet. Uses core, slitter and fracture tines and drains off excess surface water.


Blec USA

The GROUNDBREAKER has curved, wedge-shaped blades to penetrate 3 to 10 inches deep and fracture soil laterally with side force.


Classen

Three-point hitch, tow-behind aerators have independent tine shafts for turning ease and sealed bearings. Aerates to depths of up to 4 inches.


Earth & Turf

The Linear Aerator cuts grooves 3 inches deep, 1.5 inches wide and 3.5 inches apart. Features reverse spiral-mounted teeth.


First Products

The Aera-vator uses a vibrating action to fracture soil without disrupting turf. Use to incorporate topdressing or relieve compaction.


Gandy

Offering four models of core aerators, which also have knife options, and three spike aerators. Three-point hitch or towing packages.


Jacobsen

The 24-inch, self-propelled Greensaire 24-OPC aerator has an 8 hp, Briggs & Stratton Intek Pro engine and has seven tine options.


JRCO

Hooker soft-plug aerators offer zero-turn maneuverability and create holes up to 3 inches deep. The Hooker pulls loose plugs of soil.


Koro

The Recycling Dresser aerator/topdresser reproduces native topdressing soil/sand, decompacts the top layer and creates overseeding conditions.


L.T. Rich

The Z-Plug stand-on, zero-turn aerator comes with 36 or 46-inch tine width and 19 hp Kawasaki engine. Many attachments available.


Millcreek

Offering aerators in three frame styles, two hitch styles and two aeration options: spoons, for standard core plug, or slicing blades.


Redexim

Verti-Drills fit new and existing Verti-Drain machines utilizing standard tine heads. Available in three diameters with working depths up to 10 inches.


RotaDairon Emrex

The ED130 can be used as a dethatcher, slicer or spiker. Available in 51 and 72-inch working widths for tractors with 25 to 55 hp.


Ryan

The tow-behind Lawnaire aerator has a 36-inch aerating width and up to 4-inch aerating depth. Available with manual, hydraulic or electric lift.


SISIS North America

MAXISLIT has a 63-inch working width and slits to a depth of 7 to 9 inches. MULTISLIT has a 48-inch width and slits to a depth of 6 to 8 inches.


SourceOne

Plugr Tow Pro is a 45-inch, self-contained, reciprocating aerator attachment with an electric start, 12 hp, independent engine.


Southern Green

The SR 72 can aerify up to 16 inches and can be operated on a 35 hp tractor. An assortment of tine options are available.


T.I.P.

The Greens Spiker/Seeder overseeds and aerates in one pass. Features replaceable, stainless steel spikes. Three models available.


Toro

The new Toro 864 and 1298 aerators are 64 inches wide with eight coring heads and 98 inches wide with 12 coring heads, respectively.


Turf Specialties

Thatch Master Verti-Cuts come in 4, 5 and 6-foot widths and feature carbide-tipped blades.


Venture Products

The AERA-Vator EA600 creates a core hole without bringing a plug to the surface, leaving the turf ready to use. Makes eight holes per square foot.


WaterWick

WaterWick’s drainage and aeration process inserts gravel below the surface with little or no surface disruption.


Wiedenmann

The TerraSpike GXI can be operated with as little as 24 hp at depths up to 10 inches. The twin drive is offered with either 385 or 485 RPM.


Wood Bay

Wood Bay’s dynaBLADE verticutting replacement blades are laser-cut from steel and have tungsten carbide tips to protect them from wear.